Start with the product, not the tin
What goes in, how many of them, and how you want them arranged. Five pre-rolls lying flat side by side is a different tin to five standing upright.
That is the whole brief. Everything else follows from it.
Why we do not publish interior volumes
Because how much goes in depends on your product as much as on the tin. Two brands with the same size gummy get different counts depending on how the gummy is cut and whether it is wrapped.
So we settle it by filling rather than by quoting a number. Send the product and we will fill the candidates and tell you which one takes it.
The dimensions you will see
Round formats are quoted as a diameter and a height, like 76 by 30 millimetres. Everything else is length by width by height.
Those are external. A wall is a fraction of a millimetre of steel, so external and internal are close, but close is not the same as measured, which is why the paragraph above exists.
A shortcut for pre-rolls
Length decides it. Minis run around 70 millimetres, half-grams around 84, and full-gram or king sizes around 109. Match the length first and the rest of the pack falls into place.
Cartridges never standardised, which is why the slider range is the widest we hold.
Hold one before
you specify it.
Tell us what you're packing and we'll send the formats that suit it.